Latest Offers

Latest Offers 2017-08-18T07:44:56+00:00

August, September Offer


Introducing think3D Filament Dry Box

The most pressing problem with FDM 3D Printing is the moisture absorption by filaments leading to failed prints, nozzle clogging and overall bad 3D Printing experience. To solve this major issue, think3D has launched a filament dry box. Filament dry box removes moisture from the filaments and keep the filaments in very good condition. 

Why the filament dry box is needed?

All the 3D printing filaments tend to absorb moisture, however some of them tend to absorb moisture faster than others depending on the material. For example : Nylon, PVA  are more hygroscopic. Filaments which have absorbed too much moisture can create multiple problem when printing.

  • Bad surface quality: The water that the filament contains will boil in the nozzle and create micro bubbles in the extruded filament, resulting very rough and uneven surfaces.
  • Weak mechanical properties: These same bubbles will also lower the adhesion between the layers and will significantly reduce the overall mechanical properties of the 3d printed model.
  • Printer jam: In some case, moisture absorption can inflates and makes the filament more flexible, these issues can cause the printers to jam.
  • Artifacts on the print: When absorbing moisture, filaments can get more sticky when extruded creating more oozing, inconsistent flaws and all different related issues.


On purchase of any 3D Printer (above 1 Lakh) pre GST, you will get the filament drybox worth INR 7500.00 absolutely free. Offer valid till Sep 15th 2017. If you wish to avail this offer, please contact us at or call us on +91 81428 96564

Terms & Conditions

(a) This offer can’t be clubbed with any other offer

(b) We should receive PO & advance payment by Sep 15th 2017 to avail this offer

(c) This offer can’t be converted to any other offer

(d) This offer is valid only for 3D Printer orders above INR 1 Lakh (pre GST).

(e) Drybox mayn’t necessarily be shipped along with the machine. It will be shipped later.

(f) think3D reserves right to cancel this offer for any particular customer, esp. in cases when we offer cash discounts.


  1. Shiran February 12, 2017 at 9:05 am - Reply

    hi, do you build building models?

    • think3D Customer Care
      think3D Customer Care February 22, 2017 at 5:46 am - Reply

      Yes, we do. Our engineers will get back to you with the list of inputs that we need for making building scale/ miniature models.

  2. Ramakrishnan s March 3, 2017 at 1:54 pm - Reply

    HI SIR

Leave A Comment

Solve *Time limit is exhausted. Please reload CAPTCHA.