CERAMIC RESIN

Ceramic Resin Banner

About Ceramic resin Material

The new Ceramic Resin is a silica-filled photopolymer. Before being cooked, the pieces printed with this material have a porcelain-like finish; the cooking would burn all the photopolymer away and thus obtain a completely ceramic part that can be varnished. It has a high thermal resistance (up to 1000° C) and can withstand wear and corrosion. Be careful though, as the material would be a little more complex to handle depending on the manufacturer in comparison to their entire range of resins. They recommend doing several tests and experiments before printing the desired part.

Ceramic Resin is a silica-filled photopolymer. After firing, the photopolymer network burns out to form a true ceramic part. Fired parts have unique properties that can be leveraged for applications where fired part accuracy is not critical. Parts 3D printed in silica-filled Ceramic Resin can be fired to create a fully
ceramic piece

Materials

Quick Overview

ProcessesLead TimeColorTolerancePriceApplications
3D Printing2-4 Days based on sizeWhite SLA - 40 µmLowest in marketHigh temperature resistant parts
Materials

Design Recommendations

Services NameMax SizeMin SizeMin ThicknessUndercutsRadii Depth
For 3D PrintingMax Part Size: 150 x 150 x 100 mmMin Hole size : 1 mmMin Wall Thickness: 1 mmMin Feature Size : 3 mmRecommended fillet & Chamfer angles : > 45 Deg
FAQs

Frequently Asked Questions

We take photopolymeric ceramic resin which is simulated version of original ceramic material.

High temperature applications like aerospace.

Ceramic Resin is a silica-filled photopolymer. After firing, the photopolymer network burns out to form a true ceramic part. Fired parts have unique properties that can be leveraged for applications where fired part accuracy is not critical.

  • Heat resistant over 1000 °C
  • Resistant to deformation over time
  • Dinnerware safe when glazed
OUR VALUABLE

Clients

Think3D has been a great partner for us in supplying COVID-19 test cartridges on-time despite the pandemic challenges. When we came up with a new requirement needing a workforce of more than 25 people, think3D took up the challenge and arranged the workforce within 2 days. I highly recommend think3D for any manufacturing needs.
 

Sanket Srivatsav
Production In-Charge, Molbio

As a professor doing research on new materials, I needed a strong industry partner to assist us. think3D perfectly fit that bill. think3D team is highly knowledgeable on all manufacturing technologies and the team is very prompt in responding to all our requests. My research has been very successful, thanks to think3D team.


Dr. Karthik Chetan V
Asst. Professor, BITS Pilani

We found issue with one part at the time of assembly and needed a quick replacement. think3D team has quickly responded to our request, redesigned the part and printed it using metal 3D Printing and delivered in 3 days time. The part came out really well and the design was better than that of the actual one.


Rama Krishna
Senior Manager (IMM), BDL