Upload files in .zip/.rar format for quick quotation. If any questions, click here to contact us.
Accepted file types: stl, obj, step, iges, sldprt, zip, rar.
Note: Upon filling the details above, you will receive a pre-attested NDA form from think3D ensuring the protection of your IPR.
Can I get a picture of surface finish before ordering. That will help me in finalising the material
Thank you for contacting us. Our engineers will get back to you on this shortly.
Can you quote the price by looking at the cad model and the printing time,including the delivery charges?
Can you quote the price for printing an 10x10x10 cm3 Volume with hollow space ?
Thank you for reaching out to us. It will be too difficult to give an estimate without knowing the parts. We can share the quote once you give the 3D design or rough 2d sketches/ 2d drafts/ section views/ pencil sketches etc with your end expectations (3d printable design, 3d rendering, etc).
How much does a print cost..like is it based on the time of print or size
Dear Sir, thanks for contacting think3D. the pricing of a 3d printed part depends upon the volume, material, and technology used to print the part, so kindly share the 3d design files on https://www.think3d.in/placeorder/. So that we can get back to you with the quotation. For any queries feel free to reach us on 8142896564.
how much do you cost for an hour?
Thanks you for reaching out to us. Corresponding person shall get back to you with required information soon.
on what base you do costing??? can you please explain me soo i can order my things. thanks
Thank you for considering us for your prototyping/ 3D Printing requirements. We will be able to provide you an estimate after you share us the CAD data. Typical file types accepted: STL/ OBJ. Cost is determined on the volume basis. For more information feel free to contact us at firstname.lastname@example.org
I requested some models to be 3d printed but I did not get a response about the cost and delivery dates. Please, let me know these at the earliest. It’s urgent.
Thank you for contacting think3D!
Sorry for the inconvenience caused.
We have received your request and our team is working on it and will revert back shortly.
Really strange. no response from think3d even after a week of placing the order.
Greetings from think3D.
Sorry for the inconvenience caused.
We have received your mail with stl files and our team has sent you a reply regarding the issue that we need step files and Engineering drawing for metal printing services.
Please check the mail.
how do I place order for more than one 3D model, and I also want to know total cost before placing the order.
Please drop a mail to email@example.com with the design files so that our team shall assist you as per the requirement.
The acceptable formats are STL, OBJ.
We also accept STP, IGS files.
I want a personalized item in peacock feather like shape. It shall be of a shining metal with each feather/part clearly distinguished from other. It shall be supported on a metal base (removable) for ease to be placed on a table top. Can I get it done here! what shall be approximate cost!
Hai, Thanks for contacting think3D. Yes, it can be done. If you have design files or images of the object please drop a mail at firstname.lastname@example.org. We cannot estimate the cost now, once you send the mail after checking it one of our technical persons will get back to you.
how long does it usually take to get an estimate after i submit a request?
Dear Mr.Nibhrit, Thanks for contacting think3D. Kindly let to know your exact requirement. So that we can give you the proper estimation.
how and when will i get the quotation
Dear Jegan, thanks for contacting think3D. Kindly drop us a mail to email@example.com with the design files attached so that we can get back to you within 24hrs with the best quote.
Dear Mr.Jegan, our technical team has sent you a material data sheet but you haven’t confirmed anything so we are unable to proceed further. Kindly confirm it so that we can give you a quote.
What plastic do you use for 3D printing?
Dear Ankita Tamboli, thanks for contacting think3D. We use thermoplastics like ABS, PLA, PP, PC, PETG, Carbon fibre, nylon etc.
Can I know the cost for prototyping a spare part before placing the order
Dear Mr.Govindu, thanks for contacting think3D. We cannot give you cost estimation without design files, kindly share us the design files at firstname.lastname@example.org so that we can get back to you with the quotation.
I need to get some designs printed in bulk. Essentially for retail purposes, however these may be employed for industrial use as well.
Please suggest which technology and service shall be the best as per my requirements based on the sample design attached. Do let me know about the pricing for the same with respect to an order of say a 100 copies.
The file attached along is a sample design, the designs we’ll provide you shall be similar but may vary in sizes and shapes.
Thanks and regards,
Dear Mr.Sahas, thanks for contacting think3D. Kindly drop us a mail to email@example.com with the design files attached so that we can get back to you with the quotation. For other queries feel free to contact us on 8142896564.
i have made a quote request a few days ago and uploded the stl file no details about price were given and the email i recived tells me to uplode stl when i alredy did
Dear Mr.Anvito, unfortunately, we haven’t received the design files from you. Sorry for the inconvenience caused, kindly share the files to firstname.lastname@example.org, so that our technical person Mr.Sajid could quote you right away.
where to upload stl files
I need basic SLA 3d printer for dental implants. Please quote your best available models.
Dear Mr.Prosenjit, thanks for contacting think3D. Kindly drop an inquiry mail to email@example.com with your contact details in it, so that we can get back to you with the quotation.
first i want the quotation
but the your saying that ” thanks for the placing order”
Dear Mr.Amarnath, thanks for contacting think3D. It’s just an acknowledgment that we received your online request, we would first share with you the quotation and we will proceed further only once we get a confirmation from your end.
can i get the product printed in sla or dlp technology of the size 35x40x40.
if yes than what will be the difference in prices?
Dear Mr.Vikram, thanks for contacting think3D. We can print in SLA or DLP technology inhouse with the same dimension, Please fill in your requirement in the below-mentioned link so that we can get back to you with a quotation.
What is the price of my thing is not showing plese sho the price before we order
Solve *Time limit is exhausted. Please reload CAPTCHA.